Plasma Cutter Guide Wheels - Its Advantages and Usage

Unlike conventional methods like oxy-fuel cutting and grind discs, plasma cutting is the most preferred metal cutting process. It is easy, cheap and flexible in the metalworking environment. But sometimes when you need to cut certain shapes like circles, you need an accessory which helps you cut the perfect circles. This is where the plasma cutter guide wheels come in. It works like a compass, helping you to draw precise circles on metal sheets. Listed below are the benefits which might nudge you to use a guide wheel while cutting.

• It is better than cutting with a free hand

As a welder, you deal with metal sheets with varied thickness. You can effortlessly cut the thin metals but the same can't be said about thick ones, especially when you have to draw circles. Here, you can take help from the guide wheels which allow your hand to move smoothly for drawing perfect circles.

•  To avoid the shaking of your hand while cutting

When cutting, you draw the marking on the metal sheet. And then you cut along with it. But your hand may jerk due to the improper support and consequently, you will get a poorly cut product. To avoid the jerky moments, you can take help from the plasma cutter guide wheels. Also, your metal sheet is not wasted due to inaccurate cuttings.

How to use a guide wheel when cutting circles?

If the benefits are appealing, you should also know how simple it is to use a guide wheel.

Using a compass, mark a circle on the metal sheet you want to cut. Next, take the guide wheels and attach it to the plasma cutter head. Then make a hole at the centre of the circle. Take the plasma cutter and fix the centre pin into the hole.

Care must be taken that the plasma head is over the outline of the circle you have marked earlier. Now start cutting the metal with the wheels guiding your hand. You will experience easy motion and accurate cutting depending on the speed you are going. For better results, maintain a neutral speed so that you will not see irregular ridges after cutting.

Using plasma cutter guide wheels will save your time and energy. And the best part, you will have neatly edged circles which you can put to good use. If you are excited to use the guide wheels, start your search today to buy one and complete your metal project.